|
|
Tech Tips
Use this comprehensive information library whenever you need helpful hints from car repair professionals. Whether you are a professional or a DIY mechanic, you’re sure to find the tips you need to insure a job well done. Click here to go back to the previous page any time during your search.
Mazda
1989-1990 Mazda RX7- No Start
1989-1990 Mazda RX7s (Bosch p/n SR295X, SR298X) can get bounced around badly enough to cause the bracket on the front suspension tower which supports the wiring harness to cut the wires and cause an electrical short. This short circuit results in a no start condition. A quick inspection of this bracket will reveal if it is the cause of the problem. There should be at least 5 mm clearance between the bracket and the wire. If the wire is cut, repair the wire and bend the bracket to prevent this from happening again.
Go back
|
